We have noticed that you are visiting from North American areas. Would you like to browse the US site (US.DFI.com) for a better experience?




关于友通 新闻中心 DFI Targets Video Surveillance Applications with New 2nd Generation Intel Core Processor microATX Platform

DFI Targets Video Surveillance Applications with New 2nd Generation Intel Core Processor microATX Platform|新闻中心|DFI

DFI Targets Video Surveillance Applications with New 2nd Generation Intel Core Processor microATX Platform

2011/09/22 (UTC+8)

DFI, a leading provider of embedded x86 products, today announces the SB331-IPM, a new addition to its Intel Q67 product lineup. This microATX form factor board supports the 2nd generation Intel Core i7-2600, i5-2400, and i3-2120 processors that feature 32-nanometer process technology providing higher performance at lower power than previous processors.

The Intel HD Graphics 2000 engine integrated into these scalable desktop 2nd generation Intel Core processors supports six graphics execution units with dynamic turbo boost to accelerate video processing, and Intel Clear Video Technology providing advanced imaging capability for Blu Ray and other high definition video processing. Performance is further increased through the introduction of Intel Advanced Vector Extensions (AVX) to the instruction set, providing acceleration of complex audio, video, and image processing. DVI and HDMI graphics interface connectors provide dual independent display support up to 1,920 x 1,200 resolution.

In addition, this new platform supports Intel Hyper-Threading and improved Intel Turbo Boost Technology, which enables each processor core to handle two instruction threads and dynamically increase the clock speed when all cores are not fully utilized. This provides increased performance over the previous generation platform for both multi-core and non-multi-core optimized application programs. The combination of Intel Hyper-Threading, Intel Turbo Boost improvements, and the new three-level cache subsystem insures higher performance at reduced power consumption across a broad-spectrum of embedded processing applications.

This scalable desktop platform incorporates features making it ideal for networking and surveillance applications, including 3 Gigabit LAN ports, 2 PCIe x16 expansion slots (x16 and x4 signal) for video capture cards, 2 PCIe x1 auxiliary expansion slots, and 36 digital IO ports for device controls.

This compact microATX board also supports up to 16GB DDR3 1066/1333MHz memory, Intel HD audio with S/PDIF input/output interface, and the Intel Q67 express chipset delivering high performance I/O. It provides four Serial ATA 2.0 ports with speed up to 3Gb/s, two SATA 3.0 ports with speed up to 6Gb/s, 14 USB 2.0 ports, and 2 Serial COM ports. The SB331-IPM embedded board is ideal for demanding embedded applications such as networking and surveillance, industrial control automation, gaming and network video recording (NVR) applications.

SB331-IPM Features:
• microATX form factor (244mm x 244mm)
• Supports Intel Core i7-2600, i5-2400, i3-2120 processors
• Intel Q67 Express Chipset
• Up to 16GB DDR3 1066/1333MHz dual-channel memory
• DVI and HDMI interfaces supporting dual independent displays up to 1,920 x 1,200
• 3 Intel Gigabit LAN controllers
• 2 RS232/422/485 COM ports
• 14 USB 2.0 ports
• 2 Serial ATA interfaces (6Gb/s)
  4 Serial ATA interfaces (3Gb/s)
• 36 Digital I/O
• 1 PCIe x16 slot
  1 PCIe x16 slot (x4 signal)
  2 PCIe x1 slots
• Intel vPro features AMT 7.0, VT, and TxT
• Trusted Platform Module (TPM 1.2) - option

All product specifications are subject to change without notice.
Intel and Atom are registered trademarks of the Intel Corporation in the U.S. and other countries.
For more information, please call DFI sales or send us an email: inquiry@dfi.com
For more information on the SB331-IPM microATX motherboard, please visit: www.dfi.com

About DFI

Established in 1981, DFI is a leading supplier of high-performance computing technology worldwide. With more than 29 years of experience, DFI focuses on innovative design and manufacture of leading-edge board and system level products for embedded applications requiring strict revision control and long life availability. DFI uses the latest technology platforms and manufacturing techniques to produce cost-effective products for use in medical diagnostic & imaging, ATM/POS, industrial control, kiosk, security & surveillance, digital signage, gaming, and other embedded applications. As an Associate member of the Intel Embedded Alliance (IEA), DFI works closely with Intel on development of next-generation standards-based building blocks, platforms and solutions for the communications and embedded market segments.

DFI Inc.

100, Huanhe St., Xizhi Dist.,
New Taipei City 22154, Taiwan (R.O.C.)
Tel: +886 (2) 2694-2986
Fax: +886 (2) 2694-5815
Sales E-Mail: inquiry@dfi.com 
Website: https://www.dfi.com