DFI, a leading provider of embedded x86 products, today announces the SB630-CRM, the first ATX motherboard in its Intel Q67 product line. This ATX form factor board supports the 2nd generation Intel Core i7-2600, i5-2400, and i3-2120 processors that feature 32-nanometer process technology providing higher performance at lower power than previous processors.
The Intel HD Graphics 2000 engine integrated into these scalable desktop 2nd generation Intel Core processors supports six graphics execution units with dynamic turbo boost to accelerate video processing, and Intel Clear Video Technology providing advanced imaging capability for Blu Ray and other high definition video processing. Performance is further increased through the introduction of Intel Advanced Vector Extensions (AVX) to the instruction set, providing acceleration of complex audio, video, and image processing. DVI and VGA graphics interface connectors provide dual independent display support up to 1,920 x 1,200 @ 60Hz and 2,048 x 1,536 @ 75Hz resolutions, respectively.
In addition, this new platform supports Intel Hyper-Threading and improved Intel Turbo Boost Technology, which enables each processor core to handle two instruction threads and dynamically increase the clock speed when all cores are not fully utilized. This provides increased performance over the previous generation platform for both multi-core and non-multi-core optimized application programs. The combination of Intel Hyper-Threading, Intel Turbo Boost improvements, and the new three-level cache subsystem insures higher performance at reduced power consumption across a broad-spectrum of embedded processing applications.
This scalable desktop platform supports up to 32GB DDR3 1066/1333MHz memory, Intel HD audio with S/PDIF input/output interface, 2 Gigabit LAN for increased transmission speed, and up to 2 UltraDMA 33/66/100Mbps IDE devices for extending extra hard disk storage. The Intel Q67 express chipset used on this industrial motherboard delivers high performance I/O. It provides four Serial ATA 2.0 ports with speed up to 3Gb/s, two SATA 3.0 ports with speed up to 6Gb/s, 12 USB 2.0 ports, 6 Serial COM ports, and 8 digital I/O ports for device controls.
The SB630-CRM offers additional expansion capability via 1 PCIe x16 slot for video capture card, 1 PCIe x4 slot, 1 PCIe x1 or Mini PCIe slot, and 4 PCI slots.
The optional SDVO-LVDS daughterboard supports LVDS display up to 1600x1200 resolution and dimming control via hot keys.
These features make the SB630-CRM ideal for intensive applications such as gaming machine, industrial control automation, medical equipment, telecom, and transportation.
SB630-CRM Standard Board Features:
• ATX form factor (305mm x 244mm)
• Supports Intel Core i7-2600, i5-2400, i3-2120 processors
• Intel Q67 Express Chipset
• Up to 32GB DDR3 1066/1333MHz dual-channel memory
• DVI and VGA interfaces supporting dual independent displays
• 2 Intel Gigabit LAN controller
• 2 RS232/422/485 COM ports
4 RS232 COM ports
• 12 USB 2.0 ports
• 2 Serial ATA interfaces (6Gb/s)
4 Serial ATA interfaces (3Gb/s)
• 8-bit Digital I/O
• HD audio support via S/PDIF Input/Output
• 1 PCIe x16 slot
1 PCI x4 slot
1 PCIe x1 or Mini PCIe x1 slot
4 PCI slots
• Intel vPro features AMT 7.0, VT, and TxT
• Trusted Platform Module (TPM 1.2) - option
SDVO-LVDS Daughterboard Features (Optional):
• Chrontel CH7308B
• Supports 18/24-bit 1600x1200 LVDS panel
• 1 LVDS LCD panel connector
• 1 LCD/Inverter power connector
• SDVO interface
• Supports dimming control via hot keys
• 45mm x 38mm
All product specifications are subject to change without notice.
Intel and Core are registered trademarks of the Intel Corporation in the U.S. and other countries.
For more information, please call DFI sales or send us an email: email@example.com
For more information on the SB630-CRM motherboard, please visit: www.dfi.com
Established in 1981, DFI is a leading supplier of high-performance computing technology worldwide. With more than 29 years of experience, DFI focuses on innovative design and manufacture of leading-edge board and system level products for embedded applications requiring strict revision control and long life availability. DFI uses the latest technology platforms and manufacturing techniques to produce cost-effective products for use in medical diagnostic & imaging, ATM/POS, industrial control, kiosk, security & surveillance, digital signage, gaming, and other embedded applications. As an Associate member of the Intel Embedded Alliance (IEA), DFI works closely with Intel on development of next-generation standards-based building blocks, platforms and solutions for the communications and embedded market segments.