联系我们

全球据点

在线咨询

在线咨询技术人员

联系我们

透过电子邮件询问问题或提供意见

告诉我们您的想法

可以请您回答一个简短的问卷吗?

网站反馈

*必填栏位

感谢您填写这份问卷。您的反馈将有助于改进我们的网站,并提供更好的用户体验。

网站反馈

您的反馈建议已成功送出,非常感谢您的参与。

关闭

KS156-AL

工业级触控计算机及显示器 无风扇触控计算机 KS156-AL
  • 1x 2.5" SATA drive bay
  • IP65 Front Panel Protection
  • VESA/Panel Mount
  • Rich I/O: 2 LAN, 2 COM, 4 USB 3.0
  • 15.6" 1366x768 TFT LCD Panel with Touch Screen
  • 15-Year CPU Life Cycle Support Until Q1' 31 (Based on Intel IOTG Roadmap)

状态 : 上市产品

无风扇设计
IP65防水防尘前面板
1Gb以太网络
Mini PCIe扩充插槽
12V DC-in
产品比较
目前共有 样产品 ,Up to 3 items.
前往比较
加入询价表
目前共有 ,Up to 3 items.
前往询价
KS156-AL | Intel Atom E3900 | Apollo Lake | Industrial Panel PC | DFI
KS156-AL | Intel Atom E3900 | Apollo Lake | Industrial Panel PC | DFI
KS156-AL | Intel Atom E3900 | Apollo Lake | Industrial Panel PC | DFI
KS156-AL | Intel Atom E3900 | Apollo Lake | Industrial Panel PC | DFI
系统
处理器
Intel Atom® Processor E3900 Family, BGA 1296
Intel Atom® x5-E3940 Processor, Quad Core, 2M Cache, 1.6GHz (1.8GHz), 9.5W
Intel® Pentium® Processor N4200, Quad Core, 2M Cache, 1.1GHz (2.5GHz), 6W
内存
Two 204-pin SODIMM up to 16GB
Dual Channel DDR3L 1867MHz
BIOS
Insyde SPI 64Mbit (supports UEFI boot only)
显示和触控屏幕
屏幕
15.6” 1366x768 TFT LCD Panel with Capacitive/5-Wire Resistive Touch Screen
亮度
400 cd/m²
对比度
500:1
背光寿命
50,000 hours
显示
控制器
Intel® HD Graphics
特性
OpenGL 5.0, DirectX 12, OpenCL 2.1
HW Decode: AVC/H.264, MPEG2, VC1/WMV9, JPEG/MJPEG, HEVC/H.265, VP8, VP9, MVC
HW Encode: AVC/H.264, JPEG/MJPEG, HEVC/H.265, VP8, VP9, MVCOpenGL 5.0, DirectX 12, OpenCL 2.1
HW Decode: AVC/H.264, MPEG2, VC1/WMV9, JPEG/MJPEG, HEVC/H.265, VP8, VP9, MVC
HW Encode: AVC/H.264, JPEG/MJPEG, HEVC/H.265, VP8, VP9, MVC
显示器
1 x VGA
1 x HDMI
VGA: resolution up to 1920x1200 @ 60Hz
HDMI: resolution up to 3840x2160 @ 30Hz
双重显示
HDMI + VGA
储存
外插/内插
1 x 2.5" SATA 2.0 Drive Bay
扩充
界面
1 x M.2
1 x Full-size Mini PCIe (PCIe/USB)
音讯
音讯编译码器
Realtek ALC888 5.1-channel
以太网络
控制器
2 x Intel® I210AT PCIe (10/100/1000Mbps)
LED
指示灯
1 x Power LED
1 x HDD LED
上板输入/输出
天线连接器
2 x Antenna Hole for Wi-Fi or Cell Module
底板输入/输出
以太网络
2 x GbE (RJ-45) (10/100/1000Mbps)
串口
2 x RS-232/422/485 (DB-9)
USB
4 x USB 3.0 (type A)
显示
1 x VGA
1 x HDMI
音源
1 x Line-out
按键
1 x Power Button
监视定时器
看门狗定时器
System Reset, Programmable via Software from 1 to 255 Seconds
电源
类型
12V DC
15V - 36V DC
端口
DC Jack
支持操作系统
支持操作系统 (UEFI Only)
Windows: Windows 10 (64-bit)
Linux: Yocto Project
Fedora 24 (Intel Graphics Driver available)
Linux
环境指标
运作温度
0 to 50°C
储存温度
-30 to 70°C
相对湿度
5 to 85% RH (non-condensing)
机械结构
结构
Sheet Metal
IP等级
IP65 Front Panel Protection
安装方式
Panel/VESA Mount
尺寸 (宽 x 高 x 深)
412.1 mm x 261.4 mm x 63 mm (W x H x D)
重量
TBD
安规认证
冲击测试
OP: Half-sine, 3G @ 11ms
Non-OP: Half-sine, 5G @ 11ms
抗振动测试
OP: Random, 1Grms @ 5~500Hz, 30min
Non-OP: Sweep sine, 3Grms @ 10~500Hz, 30min
认证
TBD
装箱单
装箱单
1 KS156-AL Touch Panel PC
1 Poron foam
1 Chassis Panel Mount Bracket
1 Quick Installation Guide
Note: Please choose "KS156-AL product page > Download button" to download the Driver and Manual.
订购资讯
  • 型号 料号 描述
  • 型号 :
    KS156R-ALDC12-4200
    料号 :
    TBD
    描述 :
    15.6" Panel PC, AL171, Intel Pentium® N4200, 12V DC-in, 5-Wire Resistive Touch
  • 型号 :
    KS156P-ALWD36-3940
    料号 :
    TBD
    描述 :
    15.6" Panel PC, AL173, Intel Atom® E3940, 15-36V DC-in, Capacitive Touch
  • 型号 :
    KS156P-ALWD36-4200
    料号 :
    TBD
    描述 :
    15.6" Panel PC, AL173, Intel Pentium® N4200, 15-36V DC-in, Capacitive Touch
选购品
  • 品名 料号 描述
  • 品名 :
    Memory
    料号 :
    138-340001-109G
    描述 :
    DDR3L SO-DIMM 204-pin, 4GB
  • 品名 :
    Wi-Fi
    料号 :
    761-110091-000G
    描述 :
    Wi-Fi kit, RoHS
  • 品名 :
    Power Cord
    料号 :
    332-700010-201G
    描述 :
    Power cord, Standards (USA), 1.8m, RoHS
  • 品名 :
    Power Adapter
    料号 :
    671-106012-000G
    描述 :
    60W, 12V/5A, Level 6, RoHS
  • 品名 :
    Panel Mount
    料号 :
    TBD
    描述 :
    Panel PC Panel Mount Kit, RoHS

* 785-XXX is a group number instead of a unique part number. Please contact your regional sales representative if you need more information.

All-in-One, One for All - DFI’s Industrial Panel PCs

DFI’s KS070-AL/KS156-AL industrial touch panel PCs based on Intel Atom® Processor E3900 series are equipped with not only processing improvements, but also features friendly interfaces and modern industrial design. With abundant features such as fanless design, IP-65 certified front panel, multi-touch capability, and rich I/O expansion, the panel PCs perfectly meets the crucial requirements within factory automation, transportation, and embedded applications.

IP65 Front Panel Protection

In factory environments, the shop floor is probably surrounded by dust or moisture. These environmental factors could be a tough challenge for the HMI to operate stably. KS070-AL/KS156-AL features an IP65 front panel protection and dust and water resistance, which may impact the progress and the efficiency of work on the production line.

Energy Efficiency & Excellent Performance

Based on Goldmont architecture with 14 nm process technology, the Intel Atom® processor E3900 series empowers the KS070-AL/KS156-AL touch panel pc. Featuring real-time computing and efficient energy consumption, KS070-AL/KS156-AL is the perfect solution for smart energy management, MES system, and remote monitoring.

Reliable Non-stop Operating

Incorrect grounding, inadequate building wiring, or large loads of sharing on the same circuits are common reason that would cause the impact of power fluctuation under crucial factory environment. KS070-AL/KS156-AL is capable of wide range 9~36V DC power input and protecting damage from these issue.

100% In-house Boards

With in-house production, it eases the control= over manufacturing quality and protects from a risk of fraud and confidentiality issues. KS070-AL/KS156-AL is developed based on 100% in-house DFI‘s industrial motherboard “AL551/AL171” series, ensuring lower costs of maintenance by all-in-one design and passes through comprehensive process of quality control.

From Design to Manufacturing, Link by Link

Each procedure from design to manufacture is important and closely linked and inseparable. DFI integrates 100% in-house development and production to maximize efficiency, enhance greater control of production quality, and provide 24/7 global service for wide variety of customers.

Support Gloved Touch

KS070-AL/KS156-AL is implemented by a customized form of gloved-friendly multiple touch technology. Users are able to operate the equipment with working gloves to enhance the efficiency and safety.

Easily Integrates Into Any Devices

To meet the requirements from various market fields, KS070-AL/KS156-AL features customized bezels with different materials and open-frame design. KS070-AL/KS156-AL is built to tailor the solutions for factory automation, transportation, and KIOSK applications.