What if You Could Have the Most Suitable Embedded Boards for Your IoT Solution?｜Press Room｜DFI

DFI is Rolling out a Rugged IoT Gateway

Developing a gateway with energy-efficient and low power consumption not only makes it possible for a gateway to achieve high stability and longer endurance, but also enables palm-sized and have less heat dissipation problems. The newer embedded board FS053, being in ‘Ready to IoT gateway form factor’, can achieve the mentioned above dominances and 24/7 non-stop work that is required for bringing efficiency to the IoT solution.

Still able to address the computation, communication, and filter the sensor data, the FS053 is designed with wide voltage (9~36V) and temperature (-20 to 70°C) that can run in multiple applications and areas. Taking a step further, the Pico-ITX is a small form factor with rich I/O ports (2 GbE, 2 COM, 4 USB 2.0, 1 Mini PCIe, 1 SD) that fulfills multiple IoT needs.

2.5" Pico-ITX : FS053
Features: 

● NXP Cortex-A9 i.MX6 DualLite/Quad 1.0 GHz
● 9~36VDC wide voltage
● 1GB/2G DDR3L SDRAM memory down
● Dual independent displays: HDMI + LVDS
● Rich I/O: 2 GbE, 2 COM, 4 USB 2.0, 1 Mini PCIe, 1 SD

ARM based series

Another ARM based product is FS051. This cost-effective Pico-ITX comes with ARM based features that are the same as FS053. Although it is a small form factor, FS051 supports rich I/O interfaces (1 GbE, 3 COM, 5 USB 2.0, 1 Mini PCIe, 1 SD, and 1 SIM) that is more suitable for a diversity of applications. Specially, FS051 contains CAN-Bus, which can meet the users’ requirements for fewer cables, more reliability, and faster information transmission. Made of high-strength materials and designed for wide temperature, FS051 can also operate in harsh environment.

2.5" Pico-ITX :
FS051Features: 

● NXP Cortex-A9 i.MX6 DualLite/Quad 1.0 GHz
● 1GB/2G DDR3L SDRAM memory down
● Dual independent displays: HDMI + LVDS
● Expansion: 1 Mini PCIe, 1 SD, 1 SIM (Optional)
● Rich I/O: 1 GbE, 3 COM, 5 USB 2.0, 1 CANBus